I've gotten myself into another issue though.
Everything was working fine, but one day after a simple restart everything stopped.
Totem stays on silent, Rhythmbox, requires 'gstreamer element autoaudiosinc' all of the sudden and Ossxmix is dead during any operation, though all the volumes are maxed.
Could you please help me out?
I've tried to solve the 'gstreamer element autoaudiosinc' error, bu the conventional solution doesn't work.
Also, when I go to 'gstreamer-properties' and test both of the pipelines with osssinc and osssrc i get:
Code: Select all
Error running pipeline 'OSS - Open Sound System': Could not open audio device for playback. [gstosssink.c(417): gst_oss_sink_open (): /GstPipeline:pipeline0/GstOssSink:osssink3:
system error: No such device or address]
Strangelly enough osstest works perfectly fine...
Here's by ossmix:
Code: Select all
Selected mixer 0/High Definition Audio ALC268
Known controls are:
jack.int-speaker.mode <mix|input> (currently mix)
jack.int-speaker.mute ON|OFF (currently OFF)
jack.int-speaker.speaker [<leftvol>:<rightvol>] (currently 63.9:63.9 dB)
jack.int-speaker.speaker-mute ON|OFF (currently OFF)
jack.black.mode1 <mix|input> (currently mix)
jack.black.mute1 ON|OFF (currently OFF)
jack.black.headphone [<leftvol>:<rightvol>] (currently 45.9:45.9 dB)
jack.black.mute.headphone ON|OFF (currently OFF)
jack.black.mute.speaker ON|OFF (currently OFF)
jack.black.mode2 <speaker|input> (currently input)
jack.black [<leftvol>:<rightvol>] (currently 39.9:39.9 dB)
jack.black.mute2 ON|OFF (currently OFF)
jack.int-mic [<leftvol>:<rightvol>] (currently 39.9:39.9 dB)
record.select.select1 [<leftvol>:<rightvol>] (currently 32.9:32.9 dB)
record.select.select2 <speaker|int-mic> (currently speaker)
record.select.select3 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
record.select.select4 <speaker|int-mic> (currently speaker)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-channels <Stereo|Multich> (currently Multich)
vmix0-src <Fast|High|OFF> (currently Fast)
vmix0-outvol <monovol> (currently 24.0 dB)
vmix0-invol <monovol> (currently 15.0 dB)
vmix0.pcm7 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm8 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
Any Ideas? Any extra info?